User guide

SAMSUNG DCS PROGRAMMING

TECHNICAL MANUAL December 1996

MMC: 205 ASSIGN LOUD

BELL

DESCRIPTION:

Designates the station that controls the loud bell ring output of a Trunk A card. Each Trunk A card

has one loud bell output; these outputs are given a DN of 3901–3920 as a default value to enable

them to be assigned.

The loud bell will follow the ring cadence of the designated station. Only a station can be

assigned to control the loud bell; a station group cannot be assigned.

PROGRAM KEYS

UP & DOWN Used to scroll through options

KEYPAD Used to enter selections

SOFT KEYS Move cursor left and right

SPK Used to store data and advance to next MMC

HOLD Clears previous entry

ACTION DISPLAY

1. Press TRSF 205

Display shows current setting

[3901] LOUD BELL

RING PAIR : NONE

2. Dial loud bell number (e.g., 3902)

Use UP or DOWN to scroll through loud bell

numbers and press RIGHT soft key to move the cursor

[3902] LOUD BELL

RING PAIR : NONE

3. Enter station number (e.g., 201)

Press UP or DOWN key to make selection and

press RIGHT soft key to return to step 2

[3902] LOUD BELL

RING PAIR :201

4. Press TRSF to store and exit

Press SPK to store and advance to next MMC

DEFAULT DATA: UNASSIGNED