User guide

SAMSUNG DCS PROGRAMMING

TECHNICAL MANUAL December 1996

MMC: 204 COMMON BELL CONTROL

DESCRIPTION:

Determines whether the common bell relay contacts have an interrupted or continuous closure

when activated. If interrupted is chosen, the relay follows an internal C.O. ring pattern of one

second closed followed by three seconds open.

As default, all common bell relay pairs are assigned as 380X.

PROGRAM KEYS

UP & DOWN Used to scroll through options

KEYPAD Used to enter selections

SOFT KEYS Move cursor

SPK Used to store data and advance to next MMC

ACTION DISPLAY

1. Press TRSF 204

Display shows current setting

[3801]COM. BELL

CONTINUOUS

2. Dial common bell number

Press UP or DOWN key to make selection of

common bell numbers and press RIGHT soft key to

advance cursor

[3802]COM. BELL

CONTINUOUS

3. Dial 0 for continuous or 1 for interrupted operation

Use UP or DOWN to scroll through options

Press RIGHT soft key to return to step 2 above

[3802]COM. BELL

INTERRUPTED

4. Press TRSF to store and exit

Press SPK to store and advance to next MMC

DEFAULT DATA: CONTINUOUS