User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 203 ASSIGN UA
DEVICE
DESCRIPTION:
Assigns ringing device to be accessed when a Universal Answer (UA) key is pressed or the UA
pickup code is dialed. To assign UA, assignment is made in MMC 601 Assign Station Group for a
group and then the group is entered here. The UA device may be one of the two device types
listed below. The device type is automatically determined by the directory number (DN) entered.
DIRECTORY NUMBER DEVICE TYPE DESCRIPTION
201–349 STATION The UA device is a keyset or SLT.
3601–3602 ROP Ring over page.
500–529 STATION GROUP The UA device is a station group.
NOTE: Only one of the above options can be selected. If the ability to ring more than one item
(e.g., all four external page zones) is required, a station group containing all four zone codes
must be created.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter DN of selected device
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 203
Display shows current assignment
ASSIGN UA
NONE-NO UA
2. Dial DN of UA device (e.g., 205)
OR
Use UP and DOWN keys to scroll through
available devices
Press RIGHT soft key to return to this step
ASSIGN UA
205 -STATION
3. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: NONE
RELATED ITEMS: MMC 204 COMMON BELL CONTROL
MMC 601 ASSIGN STATION GROUP
MMC 605 ASSIGN EXTERNAL PAGE ZONE