User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
ACTION DISPLAY
1. Press TRSF 116
Display shows
[201]ALM REM(1)
HHMM: è NOTSET
2. Dial station number (e.g., 205)
OR
[205]ALM REM(1)
HHMM: è NOTSET
Press UP or DOWN to select station
and press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all stations
[ALL]ALM REM(1)
HHMM: è NOTSET
3. Dial 1–3 to select alarm (e.g., 2)
OR
[201]ALM REM(1)
HHMM: è NOTSET
Press UP or DOWN to select alarm and
press RIGHT soft key to move cursor
OR
Press LEFT soft key to return to step 2
4. Enter alarm time in 24 hour clock format
(e.g., 1300)
[205] ALM REM (2)
HHMM:1300 è NOTSET
Display will automatically advance
to step 5
5. Dial valid entry from above list for
alarm type
OR
[205] ALM REM
HHMM:1300 è DAILY
Press UP or DOWN to select alarm type
and press RIGHT soft key to move cursor
6. Enter messages using above table and press RIGHT
soft key to return to step 2
[205] ALM REM
Sam SMITH
7. Press TRSF to store and exit
OR
Press SPK to store and advance to
next MMC
DEFAULT DATA: ALARMS SET TO NOTSET
RELATED ITEMS: “A” BUTTON IS BUTTON #19 ON KEYSET