User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 112 ALARM REMINDER
DESCRIPTION:
Allows the system administrator or technician to set or change the alarm clock/appointment
reminder feature for any station. This must be done for single line telephones as they cannot
access programming. Three alarms may be set for each station and each alarm may be defined
as a one-time, TODAY alarm or as a DAILY alarm as described below. The TODAY alarm is
automatically canceled after it rings, while the DAILY alarm rings every day at the same time.
Alarm numbers are 1, 2 and 3.
Entry Alarm Type
DIAL 1 NOTSET
DIAL 2 TODAY
DIAL 3 DAILY
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 112
Display shows
[201]ALM CLK(1)
HHMM: è NOTSET
2. Dial station number (e.g., 205)
OR
[205]ALM CLK(1)
HHMM: è NOTSET
Press UP or DOWN to select station
and press RIGHT soft key to move cursor
3. Dial 1–3 to select alarm (e.g., 2)
OR
[201]ALM CLK(1)
HHMM: è NOTSET
Press UP or DOWN to select alarm and
press RIGHT soft key to move cursor
OR
Press LEFT soft key to return to step 2
4. Enter alarm time in 24 hour clock
format, e.g., 1300
[205] ALM CLK (2)
HHMM:1300 è NOTSET
Display will automatically advance
to step 5
5. Dial valid entry from above list for
alarm type
[205] ALM CLK
HHMM:1300 è DAILY
OR
Press UP or DOWN to select alarm type
and press RIGHT soft key to move cursor and return
to step 2