User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 606 ASSIGN SPEED BLOCK
DESCRIPTION:
Provide a means of adding or deleting speed dial blocks to the system or an individual keyset.
With the ability to delete a block or blocks or speed dial, it will not be necessary to waste these on
such items as voice mail, SIMs, DPIMs or for stations that do not require the ability to use speed
dial.
The Free List will show how many bins are left to be assigned. One block has a ten (10) entries.
DCS has a 1500 entries maximum in a system, 500 for System Speed and 50 on a per station
maximum. But DCS/Compact has a 500 entries maximum in a system, 500 for System Speed and
50 on a per station maximum. Accordingly, for instance, if the System Speed block has been
assigned as 500 entries then 1000 entries on DCS and 0 on DCS/Compact can be shared by all
extensions.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear entry
TRSF To exit programming
ACTION DISPLAY
1. Press TRSF 606
Display shows
FREE LIST:60
SYSTEM:20
2. Press RIGHT soft key to advance cursor to next line FREE LIST:60
SYSTEM:20
3. Make a selection of SYSTEM or EXT using UP or DOWN
key and press RIGHT soft key to advance cursor
FREE LIST:60
EXT201:1
4. Enter desired EXT numbervia dial key pad (e.g., 205)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to advance cursor
FREE LIST:60
EXT205:1
5. Enter in valid number for bins (e.g., 0–5 for EXT or 00–50
for SYSTEM)
OR
Press UP or DOWN key to make selection
OR
Press HOLD key to delete bin(s)
BUSY LIST:60
EXT205:5
6. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC