User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 605 ASSIGN EXTERNAL PAGE ZONE
DESCRIPTION:
Determines which relays will close when one of the four external page zones is accessed.
NOTE: The system must be equipped with a Trunk A card to allow external paging. Each Trunk A
card is equipped with two external page relays. The page relays have default DNs of 360X.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 605
Display shows first page zone
EXT. PAGE ZONE:(5)
MEMBER 001:3601
2. Dial page zone number (e.g., 6)
OR
Use UP or DOWN to select desired page zone numbers
and use press RIGHT soft key to move the cursor
EXT. PAGE ZONE:(6)
MEMBER 001:NONE
3. Dial member number (e.g., 05)
OR
Use UP or DOWN to select member numbers and use
the RIGHT soft key to move the cursor
OR
Press the LEFT soft key to return to step 2 above
EXT. PAGE ZONE:(6)
MEMBER 05:
4. Dial relay number via dial key pad (e.g., 3602)
and press RIGHT soft key to return to step 2
OR
Press LEFT soft key to return to step 3 above
EXT. PAGE ZONE:(6)
MEMBER 005:3602
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: NONE
RELATED ITEMS: MMC 723 SYSTEM KEY PROGRAMMING