User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 604 ASSIGN STATION TO PAGE ZONE
DESCRIPTION:
Allows the technician to assign a keyset to any of the four internal paging zones and all page
(page plus ∗). The total number of keysets that can receive a page is limited to 80. A keyset may
be assigned to more than one zone.
The assignment is controlled by the use of class marks. If a keyset is flagged as “1” in a zone
column, it will receive pages for that zone. If the keyset is flagged as “0,” it will not receive pages
for that zone. Keysets can receive pages for more than one zone.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear entry
ACTION DISPLAY
1. Press TRSF 604
Display shows
ENTRY:STN :1234*
01:NONE:00001
2. Enter index number (01–80, e.g., 05)
via dial key pad
OR
Press UP or DOWN key to make selection And press
RIGHT soft key to move cursor
ENTRY:STN :1234*
05:NONE:00001
3. Enter station number (e.g., 205) via dial key pad
OR
Press UP or Down key to make selection and press
RIGHT soft key to move cursor
ENTRY:STN :1234∗
05:205 :00001
4. Move cursor under page zone desired by
pressing UP or DOWN key and enter the digit 1 under
zone and press RIGHT soft key to return to step 2 to
continue with entries
ENTRY:STN :1234∗
05:205 :01001
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: NO STATIONS ASSIGNED
ALL ZONE IS SET
RELATED ITEMS: MMC 723 SYSTEM KEY PROGRAMMING