User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 601 ASSIGN STATION GROUP
DESCRIPTION:
This program is much like MMC 600 Assign Operator Group but this one is for stations only. The
station groups that are available in this MMC will provide more flexibility in the usage of Uniform
Call Distribution (UCD), AA GROUP and VM/AA applications. A station, Common bell, and Ring
Page can be in more than one group, but must all be the same ring type. There is a maximum of
48 members per group.
NOTE:
1. A device for announcement if used must provide a hookflash and return the call back to the
group. If a station is in more than one group and attempts to use the IOG key, it will be r
emoved from all groups.
2. In DCS/Compact System: maximum 30 of members are allowed in one group.
GROUP TYPES
0 NORMAL GROUP
1 VMAA GROUP Can only have distribute or sequential ringing.
2 UCD GROUP Has wrapup capability.
3 AA GROUP Can only distribute or sequential ringing.
Other possible entries:
3801–3820 COM. BELL This device is a common bell relay on a Trunk A
card.
3601–3640 RING PAGE This device is ring over an external page zone output
of a Trunk A card.
FEATURE KEY
0 TYPE Group type (Normal, VM/AA, UCD)
1 RING Ring mode
2 OVERFLOW Overflow time
3 GRP TRSF Group transfer time
4 WRAP-UP Wrap-up time (timer only valid.in type = UCD)
5 NEXT PORT Overflow port
6 MEMBER Group member (e.g., station 202)
RING MODES
0 SEQUENTIAL The first idle station listed in the group will ring. If the first is busy, the
next idle station will ring.
1 DISTRIBUTE The first call will ring the first station listed in the group. The next call
will ring the next station listed in the group.
2 UNCONDITION All the stations listed in the group will ring, busy stations will receive
off-hook ring. MAXIMUM 32 STATIONS RINGING.
PROGRAM KEYS