User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 600 ASSIGN OPERATOR
GROUP
DESCRIPTION:
Used to assign members to the operator group. There are several options that can be selected
for ringing, overflow, group transfer and overflow destination. There are a maximum of 32
members allowed in one group. The operator group is automatically assigned group number 500.
Note: In DCS/Compact System: maximum 30 of members are allowed in one group.
FEATURE KEYS
0 RING Ring mode
1 OVERFLOW Overflow time
2 GRP TRSF Group transfer time
3 NEXT PORT Overflow port
4 MEMBER Group member (e.g., station 202)
RING MODES
0 SEQUENTIAL The first idle station listed in the group will ring. If the first is busy, the
next idle station will ring.
1 DISTRIBUTE The first call will ring the first station listed in the group. The next call
will ring the next station listed in the group.
2 UNCONDITION All the stations listed in the group will ring. Busy stations will receive
off-hook ring (MAX 32 STATIONS RINGING).
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 600
Display shows
[500] OPER.GROUP
RING:UNCONDITION
2. Dial feature option (0–4, e.g., 3)
OR
Press RIGHT soft key to select option and move cursor to
next step
[500] OPER.GROUP
NEXT PORT:NONE
3. Press RIGHT soft key to move cursor [500] OPER.GROUP
NEXT PORT:NONE