User guide

SAMSUNG DCS PROGRAMMING

TECHNICAL MANUAL JUNE 1997

MMC: 510MESSAGE WAIT LED CADENCE

DESCRIPTION:

Provides the ability to customize the Message Wait LED cadence. There are two cadences

available. The two cadence are CONTINUOUS & INTERRUPT. The LED cadence control may be

changed from interrupt to continuous. The default setting of interrupt cadence is from 2000 to

2000.

The two options are as follows ;

• CONTINUOUS : When the Message is accepted to the SLT that has Message Wait LED,

the Message wait LED will be turned on continuously.

• INTERRUPT : On the above state, the LED will be filckered. The flickering interval can

be set/changed by MMC.

PROGRAM KEYS

UP & DOWN Used to scroll through options

KEYPAD Used to enter selections

SOFT KEYS Move cursor left and right

SPK Used to store data and advance to next MMC

HOLD Used to clear previous entry

ACTION DISPLAY

1. Press TRSF 510

2. Press UP or DOWN key to select cadence or

Press digit 0 or 1 via Dial Key Pad

MW LED CADENCE

CONTINUOUS LED

3. If you select the INTERRUPT LED mode, You can enter

the new value using keypad (default value is 2000)

MW LED CADENCE

INTERRUPT LED

MW LED CADENCE

2000 2000

4. Press TRSF button to store and exit

Press SPK button to store and advance to next MMC

DEFAULT DATA: NONE