User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 503 TRUNK-WIDE TIMER
DESCRIPTION:
Allows certain trunk timer values to be changed on a per-trunk basis or for all trunks.
It is not advisable to change these values (with the exception of trunk flash
time)without assistance from Technical Support.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 503
Display shows
[701] ANS.BAK TM
0600 MS →
2. Dial trunk number (e.g., 704)
OR
Press UP or DOWN key to select trunk and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks and press
RIGHT soft key to move cursor
[704] ANS.BAK TM
0600 MS →
[ALL] ANS.BAK TM
[[[[MS →
3. Dial timer number from above list
OR
Press UP or DOWN key to select timer and
press RIGHT soft key to move cursor
[704] DTMP DUR.
0600 MS →_
4. Enter new timer value (must be four digits,
e.g., 0700)
System returns back to step 2
[704] DTMP DUR.
0600 MS →0700