User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 500 SYSTEM-WIDE COUNTERS
DESCRIPTION:
Used to set the values of the system counters. The counters are listed below with a brief
description of each.
1. ALARM REMINDER This is the number of times that an alarm reminder will ring a
station before canceling. RANGE = 1–99.
2. AUTO REDIAL This is the number of times the system will redial an outside
number after the auto redial feature has been activated.
RANGE = 1–15.
3. DISA INTERCOM CALL This counter sets the maximum number of intercom calls that
can be made after accessing a DISA line. RANGE = 1–99.
4. DISA LOCK OUT This is the number of attempts the system will allow to
incorrectly access a DISA line before locking out the DISA
line. RANGE = 1–99.
5. NEW CALL This is the number of times the system will allow a user to
signal New Call on a C.O. line during one call. RANGE = 1–
99.
6. UCD VISUAL ALARM
COUNTER This is the counter to determine giving visual alarm if the
number of calls are waiting to be answered in the UCD group
is reached to it.
RANGE = 0 - 25.
7. UCD AUDIO ALARM
COUNTER This is the counter to determine giving audio alarm if the
number of calls are waiting to be answered in the UCD group
is reached to it.
RANGE = 0 - 25.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL