User guide

ManualsBrandsDCS ManualsTelephoneLCD 24B

111

112

113

114

115

116

117

118

119

120

SAMSUNG DCS PROGRAMMING

TECHNICAL MANUAL December 1996

MMC: 423 S/T MODE

DESCRIPTION:

This program allows the system to choose the function of each BRI access. You can set a BRI access

as "TRUNK" to which a ISDN C.O. line is connected, or as "STATION" to which a ISDN terminal is

connected.

NOTE:

Any change made in this MMC will take effect only after restart of the BRI Card. Use MMC 418 to

restart the card.

For each BRI access, two adjacent ports are assigned, you only have to change the value for any one

of the two ports from a BRI access, then the value for the other port will be changed automatically.

PROGRAM KEYS

UP & DOWN Used to scroll through options

KEYPAD Used to enter selections

SOFT KEYS Move cursor left and right

SPK Used to store data and advance to next MMC

HOLD Used to clear previous entry

ACTION DISPLAY

1. Press TRSF 419

Display shows

[701] S/T MODE

TRUNK

2. Dial BRI trunk number (e.g.,703) or press UP

or DOWN key to select the port.

Use the RIGHT soft key to position the cursor under

TRUNK(or STATION)

[703] S/T MODE

TRUNK

3. Press UP or DOWN key to make selection (TRUNK or

STATION)

Use the RIGHT soft key to position the cursor under the

port number again.

[703] S/T MODE

STATION

4. For the other ports, repeat from 2. To 3.

5 Press TRSF to store and exit

Press SPK to store and advance to next MMC

DEFAULT DATA: TRUNK