User guide

SAMSUNG DCS PROGRAMMING

TECHNICAL MANUAL December 1996

MMC: 421 MSN DIGIT

DESCRIPTION:

Provides a method of assigning a incoming MSN call to a specific station.

If any entry in MSN DIGIT TABLE matches to incoming call's called party number, then either

the specific station is altered if it is programmed to Accept the call

the call is cleared if it is programmed to Reject the call.

If the Incoming called party number does not have matching entry in MSN table, then the

operator is altered.

Using this operation, you can give each MSN number to specific station and you can give option ;

when destination is busy,incoming call must be cleared or camp-on that station to alarm there is

another call.

There are total 8 entries on a trunk basis and each entry consists of the following fields.

0. DIGITS Digits to be received. Wild card(Q) is valid entry and 10 digits

maximum.

1. DAY DEST Destination in day mode and it could be a station, a station group.

Repeat (B) will be acceptable to the system if received-digit is within

numbering plan for a station or station group.

2. NIGHT DEST Destination in day mode and it could be a station, a station group.

Repeat (B) will be of same result at 1. DAY DEST.

3. CALL WAIT Toggles YES or NO, if YES then the call will be camped-on at busy

destination while NO gives busy indication.

4. OPTION Accept: the selected destination party will be alerted.

Rejected: the call is cleared.

NOTE:

For each BRI access, two adjacent ports are assigned, you only have to change the value for any one

of the two ports from a BRI access, then the value for the other port will be changed automatically.

PROGRAM KEYS

UP & DOWN Used to scroll through options

KEYPAD Used to enter selections

SOFT KEYS Move cursor left and right

SPK Used to store data and advance to next MMC

HOLD Used to clear previous entry