User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
• CHANNEL ANY
(Same as above description.)
• POWER FEED
This field provides a selection whether power to a BRI access will be supplied or not.
NOTE:
Any change to POWER FEED option is effective only after restart of the BRI Card. Use MMC 418 to
restart the card.
In BRI-STN, DLSEND and BRI MODE are not included, because DCS uses implicit data for this
option. DCS will use en-bloc for DLSEND and P-MP for BRI MODE.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 419
Display shows
[701] BRI-TRK
CHANNEL ANY : YES
2 Dial BRI trunk number (e.g.,703) or press UP
or DOWN key to select the port.
3.a For TRUNK ports, display will be shown as right
column.
Use the RIGHT soft key to position the cursor under
CHANNEL ANY
[703] BRI-TRK
3.a.1 Press UP or DOWN key to choose item (CHANNEL
ANY, BRI MODE or DLSEND).
If you choose BRI MODE, press RIGHT soft key to
move the cursor under YES/NO.
Use UP or DOWN key to select P-P NOR/P-P DDI/P-M
NOR/P-M MSN.
If you press RIGHT soft key cursor will be moved under
703.
If you press LEFT soft key cursor will be moved under
BRI MODE.
[703] BRI-TRK
BRI MODE:P-P NOR
3.a.2 For another items repeat 3.a.1 [703] BRI-TRK
BRI MODE : MSN
3.a.3 For another port repeat from 2
3.b For STATION ports, display will be shown as right
column.
Same rule as 3.a will be applied.
[705] BRI-STN
CHANNEL ANY:YES
3.a.3 Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: CHANNEL ANY:YES