User guide

SAMSUNG DCS PROGRAMMING

TECHNICAL MANUAL December 1996

MMC: 418 CARD RESTART

DESCRIPTION:

This option make the changes, you made in MMC417 "PRI CRC4 OPTION", MMC419 "BRI

OPTION" MMC420 "PRI OPTION" or MMC423 "S/T MODE", applied to the BRI or PRI card that

you restart.

If you run this program,each BRI CARD will be restarted according to the parometers that you set

in S/T mode and BRI option programmed by MMC423 and MMC419. Each PRI card will be

restarted according to CRC4 option and PRI option.

PROGRAM KEYS

UP & DOWN Used to scroll through options

KEYPAD Used to enter selections

SOFT KEYS Move cursor left and right

SPK Used to store data and advance to next MMC

HOLD Used to clear previous entry

ACTION DISPLAY

1. Press TRSF 418

Display shows

RESTART C:1 S:2

CARD RESTART ? NO

2. Press UP or DOWN key to select cabinet number. Press

RIGHT soft key to move cursor on slot number and press

UP or DOWN to select slot number. (e.g.,C=1, S=3)

RESTART C:1 S:3

CARD RESTART ? NO

3. Press RIGHT soft key to move cursor on NO and dial 1

RESTART C:1 S:3

ARE YOU SURE ? NO

Dial 1 and wait for 5 seconds

RESTART C:1 S:3

CARD RESTART ? NO

5. Press TRSF to store and exit

Press SPK to store and advance to next MMC

DEFAULT DATA: NONE