User guide

SAMSUNG DCS PROGRAMMING

TECHNICAL MANUAL December 1996

MMC: 415 REPORT TRUNK ABANDON DATA

DESCRIPTION:

Allows the system administrator of technician to enable or disable the reporting of bandoned CO calls

for which CLIP information has been collected on a per trunk basis.

There are two options for this MMC as follows.

0 REPORT : NOAbandoned call records for incoming calls with CLIP information

will not be printed on SMDR or stored in the system call

abandon list.

These records will continue to be stored in the station review list.

1 REPORT : YES Abandoned call records for incoming calls with CLIP information will

be printed on SMDR or stored in the system call abandon list.

These records will also to be stored in the station review list.

Note :

In order for these abandoned call records to print on SMDR, in MMC 725 SMDR

Options, Option 11 Print Abandoned Call Records must be set to YES.

ACTION DISPLAY

1. Press TRSF 415

Display shows

[701]TRK ABNDN

REPORT : YES

2. Dial TRUNK number

Press UP or DOWN to select trunk and use left or right

soft key to move cursor

[705]TRK ABNDN

REPORT : YES

3. Dial 1 for YES OR Dial 0 for NO

Press UP or DOWN to scroll through options and use left

or right soft key to return to step 2

[705]TRK ABNDN

REPORT : NO

4. Press TRSF to store and exit

Press SPK to store and advance to next MMC

DEFAULT DATA : All TRUNKS will not report data