User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 412 ASSIGN TRUNK
SIGNAL
DESCRIPTION:
Allows for the assignment of analogue DID or AC15 PCBs for proper signalling.This
MMC is only for analogue type of DID/AC15 trunks. These trunks can also use the
translation tables in MMC714. The AC15 trunks are allowed the used of translation
tables via MMC416. The signalling condition types are as follows:
CONDITIONS
IMMEDIATE DELAYED WINK
IMMEDIATE DELAYED WINK
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 412
Display shows
[701] TRK SIGNAL
IMMEDIATE START
2a. Enter desired trunk number (e.g., 705)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks
[705] TRK SIGNAL
IMMEDIATE START
2b. Enter desired trunk type selection from above list
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to return to step 2a
[705] TRK SIGNAL
WINK
3. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: All AC15 trunks set to immediate.
RELATED ITEMS: MMC 714 DID Number and Name Translation