Technical data

G9
Phone: 133 122 | Fax: [phone]
Stainless Steel Fully Coated Ties (316 Grade)
These cable ties are coated with a PVC coating, which gives the tie
a smooth surface and rounded edges, which protects the cable and assists
with operator safety.
• They can be used in highly corrosive environments, and areas with
continuous salt spray or UV radiation
• The PVC coating protects the cable, and eliminates the sharp edges
which cut into the cable
• The base tie is made from 316 stainless steel which will withstand years
of use in a harsh environment
The coating thickness is a nominal 0.1mm. They should be installed using
CABAC stainless steel tie tooling, either the SSTTT2 or SSTDT.
Maximum Min. Loop
Bundle Length Width Tensile
Catalogue Diameter Approx Approx Strength Pack
No. (mm) (mm) (mm) (kg) Quantity Tooling
Standard Range
SST200/316 50 201 4.6 44 100
SST360/316 102 360 4.6 44 100
SST520/316 152 520 4.6 44 100
SST680/316 203 680 4.6 44 100
Heavy Duty Range
SST200-HD/316 50 201 7.9 113 50
SST360-HD/316 102 360 7.9 113 50
SST520-HD/316 152 520 7.9 113 50
SST680-HD/316 203 680 7.9 113 50
SST838-HD/316 254 838 7.9 113 50
SST1000-HD/316 298 1000 7.9 113 50
SST1500-HD/316 450 1500 7.9 113 50
Note: To protect cable from sharp edges on cable ties, CABAC have a PVC protective cover which is
available in 30m reels. Part Number
SSCHD.
SSTTT2
SSTDT
316 Stainless Steel Cable Ties
Stainless Steel Cable Ties - Standard Range
CABAC’s Stainless Steel Cable Ties are a quick, effective way of securing cables that are in
a hostile environment. They have a unique ball bearing locking mechanism that allows
the tie to be quickly and easily installed, but not undone. They install much quicker than
traditional strapping systems. The heavy duty ties have an off-set tip to speed insertion of
the tie. The ties are made from 316 non magnetic stainless steel.
• Ties are packed in sturdy cardboard boxes
• Typical uses are flame-proof installations, the chemical industry and long-term
external exposure
Technical Data
Material Stainless Steel 316 grade
Tensile Strength 60 kg/mm
2
Operating Temp -80°C to +500°C
Loop Tensile Strength Standard range 45kg
Heavy-duty range 110kg
Resistance to Chemicals
High resistance to:
Petrol
Benzene
Alcohol
Acetone
Sodium hydroxide
In general very resistant to most hostile
environments.
SSTDT - Low cost
method of stainless
tie tensioning. Ideal
for casual user.
SSTTT2 - Robust Stainless
Steel Tie Tensioner. Tensions
and cuts in one operation.
316 STAINLESS STEEL CABLE TIES
Sodium phosphate
Formic acid
Acetic acid
Sulphuric acid
Seawater
Maximum Min. Loop
Catalogue Bundle Length Width Tensile
No. Diameter Approx Approx Strength Pack
(mm) (mm) (mm) (kg) Quantity Tooling
Standard Range
STFC200-316 50 201 4.6 45.4 100
STFC360-316 102 360 4.6 45.4 100
Heavy Duty Range
STFC200-HD-316 50 201 7.9 113.4 50
STFC360-HD-316 102 360 7.9 113.4 50
SSTTT2
SSTDT
Standard Range
Heavy Duty Range
halogen
free
316 non
magnetic
stainless
steel
halogen
free