Section G Cable Ties, Harness Accessories, Tapes Nylon Cable Ties G2 - G5 Tie Tensioners, Stick-On Mounts and Mounting Systems G6 - G7 PRO Cable Ties for Data G8 Stainless Steel Cable Ties G9 Cabstrap G10 Braided Sleeving G11 Spiral Binding and Loom Tube G12 Easy Wrap G13 Fibreglass Sleeving and Flexible Grommets G14 P Clips and Wall Plugs G15 Grommet (Bushing) Systems G16 Nylon Plugs and Rubber Grommets G17 Screw Range and Jack Chain G18 Double Sided, Construction Warning and Ins
Cable Ties - Nylon Polyamide 66 halogen free Our ties meet most basic cable tie needs, with choices covering a wide range of requirements for size and strength. One-piece, injectionmoulded construction provides maximum strength and adjustability for securing all sizes of bundles. Extra features such as rounded edges and bent-tip design make installation easy, fast, accurate and secure.
Cable Ties - Nylon - Halogen Free Catalogue Catalogue Loop No. No. Tensile Black Natural Strength (UV Rated) (kg) Bundle Length Width Thickness Diameter (mm) (mm) (mm) (mm) Packs Available Light Duty Ties CT196BK-LD CT196NT-LD 8 53 200 2.5 1.1 100 CT98BK CT98NT 8 22 100 2.5 1.1 100/1000 CT140BK CT140NT 18 33 140 3.6 1.2 100/1000 CT200BK CT200NT 22 50 200 4.8 1.3 100/1000 CT250BK CT250NT 22 60 250 4.8 1.4 100/1000 CT290BK CT290NT 22 76 300 4.8 1.
Cable Ties - Nylon - Halogen Free Catalogue No. Loop Tensile Strength (kg) Bundle Length Width Thickness Diameter (mm) (mm) (mm) (mm) Packs Available Releasable Cable Ties Cable Ties - Nylon - Halogen Free CTR140BK 18 33 140 3.6 1.2 100 Colour Black CTR200BK 22 50 200 4.8 1.3 100 Black CTR290BK 22 76 300 4.8 1.4 100 Black CTR365BK-HD 54 102 370 7.6 2.1 100 Black CTR500NT 114 120 480 12.6 2.1 25 Natural Screw Size 4.
Coloured Ties Coloured Cable Ties These ties are used mostly for identification, and are exactly the same as the standard CABAC ties, except that they are made from coloured nylon. Typical uses are: • Use ties of a colour to tie a cable to act as identification Typically all power cables are tied with a red tie, and data with blue • Use coloured ties to denote the inspection status of extension leads etc. • Use as security ties, with differing levels of security denoted by the colour Catalogue No.
Tie Tensioners & Stick-On Mounts Cable Tie Tooling KTT Cable tie tensioning tool speeds up cable tie application. Ensures correct tension and provides automatic cut-off. Eliminates sharp edges on cut ties. • Maximum tie width: 4.8mm • Weight: 310g • Length: 165mm KTT KTT2 Tie Tensioners & Stick-On Mounts Low cost cable tie tensioner for small intricate work. • Maximum tie width: 4.8mm • Length: 170mm • Weight: 58g KTT3 Heavy duty cable tie tensioner for heavy duty ties. KTT3 • Maximum tie width: 7.
Cable Tie Mounting Systems Screw Mounts - Saddle Type The CTB range of screw mounts are designed to securely fasten cable ties to a surface. The mounts have a two-way entry and a deep cradle design to provide extra support for large bundles and components. There are two basic sizes for standard and heavy duty ties. The bases are designed to be stronger than the tie. Catalogue Dimensions in mm No.
PRO Cable Ties PRO Ties - Continuous Reel Style • Specified for CAT6 cable support • Comes with “back to back” grip, so you simply cut lengths and tie • Gives gentle cable support, so as not to disturb the UTP lay • Supplied in reels - cut to length on site • Easy to re-open and add or remove cables • Re-usable as many times as you like • Colour: black VT12BK/50M 12mm x 50m roll VT19BK/25M 19mm x 25m roll VT12BK/50M VT19BK/25M PRO Ties - Individual Pre-Cut Ties • Pre-cut cable ties, for easy insta
316 Stainless Steel Cable Ties Stainless Steel Cable Ties - Standard Range CABAC’s Stainless Steel Cable Ties are a quick, effective way of securing cables that are in a hostile environment. They have a unique ball bearing locking mechanism that allows the tie to be quickly and easily installed, but not undone. They install much quicker than traditional strapping systems. The heavy duty ties have an off-set tip to speed insertion of the tie. The ties are made from 316 non magnetic stainless steel.
Cabstrap CABAC’s Stainless Steel Strapping System is a quick and effective way of securing or clamping items. Typical uses are securing cables to poles, signs to poles, switch boards, pipes etc. • The strap has a high clamping force, which attaches things very securely, giving long term stability • The strap is made from 304 series stainless steel, which can withstand extreme acidity, alkalinity and highly corrosive environments.
Braided Sleeving CABAC’s Braided Sleeving is an expandable flexible harness, manufactured from monofilament polyester. It’s main characteristic consists in the construction of the braiding which allows the product to increase its interior diameter considerably and at the same time contracting in length. Wire harnessing is made easy due to the expandability and ease of insertion of different diameters within the same sleeving.
Spiral Binding & Loom Tube CABAC’s Spiral Binding is designed to wrap around bundles of wires to make neat looms and protect the conductors. Each Spiral Binding type accommodates a large range of diameters and allows break outs at any point. We offer two grades: natural for indoor use and black for UV resistant outdoor use. It is quick and easy to apply. Supplied in easy use cardboard dispenser boxes. We also have Spiral Binding available in handy merchandising packs.
Easy Wrap cable bundling solution A unique solution to a messy problem. Easy Wrap zips along a bundle of cables, creating a quick and easy bundling solution. It is much quicker and easier to apply than traditional solutions such as spiral binding and loom tube.
Fibreglass Sleeving & Flex. Grommet Fibreglass Sleeving Cabac’s Fibreglass Sleeving with silicon rubber finish is flexible, flame retardant, water repellent and recommended for high temperature applications. Easily handled and quickly applied over metallic wires for electrical and mechanical protection. The fibreglass sleeving is made with a smooth interior and exterior finish to a wall thickness of approximately 0.45mm. The tight weave and silicone finish ensure the sleeve maintains its round shape.
P Clips & Wall Plugs P Clips CABAC’s “P” Clips provide an economical and secure way to mount cables and looms to just about anything. The cable, loom etc. is simply slipped into the clip and then the clip can be screwed or bolted to walls, cabinets etc. They are made from Nylon 66 and are very durable in most applications. The edges are smooth to stop the clip damaging the cable. Available in black or natural.
Grommet Bushing Systems Nylon Snap Bushings (Grommets) Grommet Bushing Systems CABAC’s Nylon Snap Bushings are a quick and simple way to protect a cable from sharp edges in penetrations, and panel holes. They simply snap into place with self contained locking teeth. G16 • Material: Nylon 66 UL, 94 V-2 • Colour: Black Dimensions (mm) Catalogue Hole Chassis Inner Outer Height No. Size A Thickness Dia. B Dia. C L Pack Size NSB8 7.8 5.2 9.4 8.0 100 NSB10 9.5 6.3 12.0 10.
Nylon Plugs & Rubber Grommets Nylon Plugs - Snap In Handy snap in Nylon Plugs that snap into a hole in a panel or chassis 0.8 to 3.2mm thick. • Material: Nylon 66 UL, 94 V-2 • Colour: Black Dimensions (mm) Catalogue Hole Chassis Outer Height No. Size A Thickness Dia. B C Pack Size NP8 100 7.8 11.9 8.0 NP10 9.5 13.0 10.5 100 NP13 12.7 16.9 10.5 100 15.9 19.8 10.5 100 22.9 10.5 50 NP22 19.0 0.8 to 3.2 22.2 24.9 11.3 25 NP25 25.0 28.3 11.5 25 NP30 30.
Screw Range & Jack Chain Self Drilling and Needle Point CABAC’s range of quality screws is shown below. They are all supplied in 100 pack plastic bags, or jars as specified.
Tapes Double Sided Tape CABAC’s Double Sided Tape has a high adhesive strength and is especially designed for holding, joining or bonding on a wide variety of surfaces. This alternative to fasteners offers the advantage of lower installation costs and is safe and easy to use. • Material: Ethylene-Vinyl Acetate • Adhesion: 0.
Self - Amalgamating Tapes SAT1 Self-Amalgamating Tape SAT1 Self-Amalgamating Tape is a highly adhesive synthetic rubber and resin based tape that ‘cures’ to a single mass once it is taped. Available in black or red.
Heatshrink & Duct Tape Heatshrink Tape HST20 Heatshrink Tape is a thin irradiated polyolefin tape that shrinks and amalgamates, forming a ridged seal on complex shapes. It is ideal for the repair of damaged cables, forming T-joints and junctions, and sealing complex shapes.
Section G.a Extension Cords & Power Boards Electrical Plug and Cord G.a24 Computer Cords G.a25 Extension Cords G.a26 Power Boards G.a27 - G.
Electrical Plug & Cord 2 Pin Plug Catalogue No. Pin Amps 7.5 2 2 Pin 7.5 Amp 2P7.5BK2 Colour Length (m) 2 Black Variant With ring terminal 2P7.5WH2 White With ring terminal 2PF7.5BK2NT Black No ring terminal, Flat cable 3 Pin Plug Electrical Plug & Cord Catalogue No. Pin Amps Colour Length (m) 3 7.5 3 Pin 7.5 Amp 3P7.5GY1.7 Grey 1.7 With ring terminal 3P7.5GY1.7NT Grey 1.7 No ring terminal 3P7.5BK2 Black 2 With ring terminal 3P7.
Computer Cords Catalogue No. Pin Computer Cords - IEC Plug Style Amps Colour Length (m) Variant 3PIECBK 3 7.5 Black 2 IEC (F) plug on end 3PIECGY 3 7.5 Grey 2 IEC (F) plug on end 3PIECBKYF-1 3 7.5 Black 2 2 IEC (F) plugs (Splitter) IECMFBK1* IEC M/F 7.5 Black 40IECMF2 IEC M/F 7.5 Black 40IECMF5 IEC M/F 7.5 Black 3PIECBKRA 3 7.
Extension Cords • All cords have a unique LED in centre of socket to show if cord is live • Heavy and industrial duty cords have clear plugs and sockets for added safety • Insulated pins that conform to Aust Standard AS/NZS 3112:2000 Household and Office Extension Leads, 240V, 10A, White ELD2 2m ELD4 4m ELD6 6m ELD8 8m ELD10 10m ELD15 15m ELD20 20m ELD2 - ELD20 Extension Cords Household and Office Extension Leads with Piggy Back Plug, 240V, 10A, Black ELD1P 1m ELD2P 2m ELD4P 4m ELD6
Power Boards and Power Adaptors Overload Protection 4 Board • Low cost basic board, featuring overload protection • Handy wall attachment points on the rear of the unit • Cord length 1m PB7 Basic Board PB7 4 Way • These adaptors are designed to double your outlets • Ideal for domestic appliances • Use only with correctly wired regular household PowerPoint (240V max load, 10amps) • PADRH1 this model extends to the right hand side • PADV1 this model is the vertical option PADRH1 PADV1 2 Way Right Hand
Power Boards Surge Protectors Power Boards Surge Protectors Surge & Spike Protection 4 and 6 Way Boards • Protect your computer hardware, electrical equipment and domestic appliances against lightening strikes and the power supply against sudden surges etc.
