User`s manual

Index
GFK-2334A Index-1
A
Adding slave devices, 3-10
C
Cable specifications, 2-4
Clear Counters (6), 5-18, 6-10
COMMREQs
Clear Counters (6), 5-18, 6-10
DP-V1 Alarm Acknowledge (9), 5-24
DP-V1 Alarm Request (9), 6-15
DP-V1 Read Request (7), 5-19
DP-V1 Read Response (7), 6-11
DP-V1 Write Request (8), 5-21
DP-V1 Write Response (8), 6-13
Get Device Diagnostics (4), 5-14
Get Device Status (1), 5-6
Get Master Status (2), 5-9
Get Slave Status, 6-5
Read Module Header (5), 5-16, 6-8
Task ID, A-2
COMMREQs, general information
error detection and handling, A-4
ladder instruction, A-2
master, 5-5
memory type codes, 5-5
programming recommendations, A-3
slave, 6-4
status word, A-5
Configuration
master network settings, 3-6
PROFIBUS master, 3-1
PROFIBUS slave, 4-1
slave devices, 3-10
D
DP-V1 Alarm Acknowledge (9), 5-24
DP-V1 Alarm Request (9), 6-15
DP-V1 Read Request (7), 5-19
DP-V1 Read Response (7), 6-11
DP-V1 setup parameters, 3-16
DP-V1 status
read indication, 4-3
write indication, 4-3
DP-V1 Write Request (8), 5-21
DP-V1 Write Response (8), 6-13
F
Fault table entries, 5-4
G
Get Device Diagnostics, 5-14
Get Device Status, 5-6
Get Master Status, 5-9
Get Slave Status, 6-5
I
Indicators
CPU366, 5-2
CPU367, 6-2
Installation procedures, 2-1
connecting the module to the PROFIBUS
network, 2-3
installing network termination, 2-5
installing the module in the rack, 2-2
system power requirements, 2-1
L
LEDs
CPU366, 5-2
CPU367, 6-2
N
Network segment length, 2-3
Network termination, 2-5
O
Overview, 1-1
P
Parameters
PROFIBUS master, 3-2
PROFIBUS slave, 4-2
Pin-out
PROFIBUS bus connector, 1-9
PROFIBUS connector, 2-3
PLC fault table entries, 5-4
Power consumption, 1-4, 1-6
Power requirements
system, 2-1
PROFIBUS
additional information, 1-2
baud rate, 2-6
bus communication, 1-7
cable types, 2-4
network connectors, 1-9
network overview, 1-7
network topology, 1-8
PROFIBUS Master
overview, 1-3
PROFIBUS Slave
overview, 1-5