User`s manual

GFK-2334A 4-1
PROFIBUS Slave CPU Configuration
These configuration procedures are intended for users with at least a basic knowledge of
the Machine Edition Logic Developer software and the Series 90-30 PLC. For help with
using the software, please see the software’s built-in help system.
Software configuration of the PROFIBUS slave CPU consists of the following steps:
 Adding the PROFIBUS slave CPU to the configuration.
 Configuring the CPU and PROFIBUS slave parameters
Adding a PROFIBUS Slave CPU to the Hardware Configuration
Add the IC693CPU367 module to the PLC rack configuration.
1. In the
Project tab of the Navigator, expand the Hardware Configuration
folder.
2. In the Hardware Configuration folder, right click the CPU Slot and select replace
module. The Module Catalog dialog box appears.
3. Select the IC693CPU367 PROFIBUS Slave CPU and click the OK button. The
module is added to the PLC configuration in the Navigator window, and the module’s
Parameter Editor window appears in the InfoViewer window space.
4
Chapter