User`s manual

GFK-2334A Chapter 3 PROFIBUS Master CPU Configuration 3-13

Note: To change the order (position) of a module, select it and click Properties. The

module Properties dialog box opens. Enter the numerical value of the new

position the module is to have. The position numbering starts at 0.

6. When you have finished adding modules, click OK. The modules appear under the

slave node in the Hardware Configuration.

Note: To add, remove, or change the order of modules associated with an existing

slave, right click the Slave node in the Hardware Configuration and choose

Configure. The Properties dialog box for the selected slave opens. (See page

3-11.)