User`s manual

3-12 Series 90™-30 CPU with Embedded PROFIBUS Interface – November 2004 GFK-2334A

4. To add modules to the slave, select the Modules tab and click Add. The Select New

Module dialog box appears.

Note: To add the slave to the configuration, you must configure at least one module.

Note: The Select New Module list of items to choose from depends on the slave. Each

type of slave is likely to have a different list of modules.

5. Select a module and click OK. The module is added to the Modules list in the slave

Properties dialog box. Add additional modules as required for your system. The

following figure shows the Modules tab after several modules have been added.