User`s manual

GFK-2334A Chapter 3 PROFIBUS Master CPU Configuration 3-11
3
Note: The following figures use the Series 90-30 367 PROFIBUS Slave module as an
example.
Name
The name assigned to the slave. You can edit the name or use the default name. The name
appears in the title bar of the dialog box (in the figure above, the default name is Station 1
(SERIES 90-30 PROFIBUS SLAVE).
Station
The address of the slave on a PROFIBUS DP network. The slave is defaulted to the next
highest available address.
Description
An optional description for the slave device. The Inspector displays a maximum of 254
characters. However, more than 254 characters can be entered in the dialog box.
Vendor
The manufacturer of the slave device, from the GSD file. This is a read-only field
Device ID
The ID of the PROFIBUS device. This is a read-only field.
Model
The model of the slave device. This is a read-only field.
Hardware Rev.
The hardware revision of the device, from the GSD file. This is a read-only field.
Class
The class of the slave device. This is a read-only field.
Software Rev.
The software revision of the device, from the GSD file. This is a read-only field.
3. Enter “Name”, “Description” and “Station” if desired.