User manual

dCS 950 / 952 User Manual Manual for Software Version 6.2x
dCS Ltd 22
nd
May 2000
Manual part no: DOC0029526B1 Page 33 Document No: OS-MA-D0002-952.6B1
Contact dCS on + 44 1799 531 999 email to: [e-mail]
(inside the UK replace + 44 with 0) web site: www.dcsltd.co.uk
Digital Interface Specifications
AES/EBU (AES3)
Input
Type Balanced, differential
Impedance 110
Ω
Sensitivity 1 ~ 10 V pk-pk
Maximum Wordlength 24 bits
Damage level > 20 V pk-pk
Connector XLR3 female
Pin 1 Ground or shield
Pin 2 +Signal
Connections
Pin 3 -Signal
Table 4 – AES/EBU input specifications
SPDIF (IEC958)
Input
Type Single ended, ground
referred
Impedance 75
Ω
Sensitivity 0.5 V pk-pk
Maximum Wordlength 24 bits
Damage level > 20 V pk-pk
Connector RCA phono
Table 5 – SPDIF input specifications
SDIF-2
Input Output
Type Single ended, ground
referred
Impedance 100 25
Ω
Sensitivity (unloaded) TTL TTL
Maximum Wordlength 24 24 bits
Damage level > 10 V pk-pk
Time skew
Word Clock in / out < 40 ns
Connector BNC x 3 BNC x 1
CH1 (left)
CH2 (right)
Connections
Clk In & Out
Table 6 – SDIF-2 i/o specifications
Remote control interface
Input
Type RS-232
Level RS-232
Data Format
Contact dCS
Connector 9 way D type male
Table 7 - Remote Control Interface Details