User guide
PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 JANUARY 2002
MMC: 315 CUSTOMER SET RELOCATION
DESCRIPTION:
System Administration access allows Customer Set Relocation with similar station
equipment. All assignments such as trunk ring, station group, station COS, station
speed dial etc. will follow the Customer Set Relocation program. 12 button keysets
and 24 button keysets can be exchanged. Basic 7 button keysets can be
exchanged with Basic 7 button key sets. Single line stations numbers can be
exchanged. If incompatible set types are selected the DCS system will provide an
ERROR:NO MATCH message. 12 button and 24 button key assignments should be
taken in consideration when relocating these types of sets.
NOTE: Customer access to this feature is default OFF in MMC 802.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
HOME
PAGE
Table of
Contents