User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 311
3i. Enter desired selection from table J (e.g., 08)
OR
[220] SIM PARA.
CHAR LENG:8 BITS
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor to
step 4
3j. Enter desired selection from table K (e.g.,
09)
[220] SIM PARA.
PARITY :NONE
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor to
step 4
3k. Enter desired selection from table L (e.g., 10)
OR
[220] SIM PARA.
STOP BIT :1
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor to
step 4
4. Enter desired selection from table C (e.g., 1)
OR
[220] SIM PARA.
CALL MODE:AWITH
Press UP or DOWN key to make selection
and press LEFT soft key to move cursor
back to step 3 and continue entries
OR
Proceed to step 5
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
HOME
PAGE
Table of
Contents