User guide
PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 311
3c. Enter desired selection from table D (e.g.,
02)
[220] SIM PARA.
ANS MODE :MANUAL
OR
Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor to
step 4
3d. Enter desired selection from table E (e.g.,
03)
[220] SIM PARA.
AUTO BAUD:ON
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor to
step 4
3e. Enter desired selection from table F (e.g.,
04) OR
[220] SIM PARA.
DTR CHECK:ON
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor to
step 4
3f. Enter desired selection from table G (e.g.,
05)
[220] SIM PARA.
ECHO :ON
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor to
step 4
3g. Enter desired selection from table H (e.g.,
06)
[220] SIM PARA.
PROTOCOL :V110
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor to
step 4
3h. Enter desired selection from table I (e.g., 07)
OR
[220] SIM PARA.
SPEED :9600
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor to
step 4
HOME
PAGE
Table of
Contents