User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 304 ASSIGN EXTENSION/TRUNK USE
DESCRIPTION:
Allows trunks on a per-station basis the ability to answer incoming calls, to dial out
or to do both. If a station is set to NO Dial, the station will not have the ability to
place a call. If the station is set to NO Answer, the station cannot answer an
incoming call.
NOTE: MMC 406 Trunk Ring Assignment will override this MMC for the Answer
option.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 304
Display shows
[201] USE [701]
DIAL:YES ANS:YES
2. Dial the station number ( e.g., 205)
OR
[205] USE [701]
DIAL:YES ANS:YES
Press UP or DOWN key to select station and
press RIGHT soft key to advance to step 3
3. Dial the trunk ID number ( e.g., 704)
OR
[205] USE [704]
DIAL:YES ANS:YES
Press UP or DOWN key to select trunk and
press RIGHT soft key to advance to step 4
HOME
PAGE
Table of
Contents