User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 1997
MMC: 210 CUSTOMER ON/OFF PER TENANT
DESCRIPTION:
Allows the LCR, TRANSFER MOH, CID CODE INSERT features to be enabled on a
per-tenant basis.
LCR ENABLE: This option determines weather the system will or will not
route outgoing calls based on the information in the LCR
routing tables contained in MMC's 710, 711, 712 and 713.
LCR access code must be assigned in Dial Numbering Plan
(MMC 724). System default is NO.
TRANSFER MOH: When this option is turned ON outside parties will hear trunk
MOH instead of ring back tone from the time a transfer is
completed until the call is answered by an internal party.
System default is NONE.
CID CODE INSERT When this option is ON the system will insert the digit “1”
when receiving CID information. When OFF the digit “1” will
not be inserted in the CID information. This option is tenant
wide. In certain areas the central offices are using a 10 digit
numbering plan for calls. This feature can reduce the
number of LCR digit table inputs in those areas that use the
CID display callback feature. System default is ON.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRSF 210
Display shows
TEN. ON AND OFF
LCR ENABLE :OFF
2. Press RIGHT soft key to move cursor
TEN. ON AND OFF
LCR ENABLE :OFF
HOME
PAGE
Table of
Contents