User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 1997
MMC: 208 ASSIGN RING TYPE
DESCRIPTION:
Provides the flexibility to program single lines to have ICM ringing, C.O. ringing and
data secure. With the many types of external ringing devices, all configurations can
be met. Only SLI boards, not key daughterboards, support disconnect signal. Do
not make VMAA ports data ring; this will return them to a single line port and stop
voice mail integration.
OPTIONS
0 ICM RING This is the default option. When set to this option stations will
ring on intercom calls with the intercom ring pattern of
400mS on, 200mS off, 400mS on and 3S off. The stations
will NOT receive a disconnect signal.
1 CO RING When set to this option stations will ring on intercom calls
with the CO pattern of 1S on, and 3S off. The stations will
NOT receive a disconnect signal
2 DATA RING When set to this option stations will ring on intercom calls
with the CO pattern of 1S on, and 3S off. The stations will
receive a disconnect signal and are protected against
intrusion tones
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 208
Display shows
[209] RING TYPE
ICM RING
2. Dial station number (e.g., 205)
OR
[205] RING TYPE
ICM RING
Press UP or DOWN to select station and
press right soft key to move cursor
HOME
PAGE
Table of
Contents