User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 JUNE 1995
MMC: 119 CALLER ID DISPLAY
DESCRIPTION:
NOTE: This MMC only applies to systems with Caller ID software.
Allows the technician to change the order in which the Caller ID information will be
displayed on an LCD set. Caller ID display options are the following:
0. NO DISPLAY No Caller ID data will be displayed.
1. NUMBER FIRST The Caller ID number received from the Central Office will
be displayed first.
2. NAME FIRST The Caller ID name received from the Central Office will be
displayed first.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SPEAKER Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 119
Display shows first station
[201] CID DISPLAY
NUMBER FIRST
Current display mode
2. Enter station number (e.g., 205)
OR
[205] CID DISPLAY
NUMBER FIRST
Press UP or DOWN to scroll through
stations and press the RIGHT soft key
to select a station
OR
Press ANS/RLS to select ALL
3. Dial display option 0, 1 or 2 (e.g., 2)
OR
[205] CID DISPLAY
NAME FIRST
Press UP or DOWN to select option
and press RIGHT or LEFT soft key to
return to step 2
HOME
PAGE
Table of
Contents