User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 JUNE 1995
MMC: 112 ALARM REMINDER
DESCRIPTION:
Allows the system administrator or technician to set or change the alarm
clock/appointment reminder feature for any station. This must be done for single
line telephones as they cannot access programming. Three alarms may be set for
each station and each alarm may be defined as a TODAY alarm (one-time) or as a
DAILY alarm as described below. The TODAY alarm is automatically canceled after
it rings while the DAILY alarm rings every day at the same time. Alarm numbers are
0, 1 and 2.
Entry Alarm Type
DIAL 0 NOTSET
DIAL 1 TODAY
DIAL 2 DAILY
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 112
Display shows
[201]ALM CLK(1)
HHMM: NOTSET
2. Dial station number (e.g., 205)
OR
[205]ALM CLK(1)
HHMM: NOTSET
Press UP or DOWN to select station
and press RIGHT soft key to move cursor
3. Dial 1–3 to select alarm (e.g., 2)
OR
[201]ALM CLK(1)
HHMM: NOTSET
Press UP or DOWN to select alarm and
press RIGHT soft key to move cursor
OR
Press LEFT soft key to return to step 2
HOME
PAGE
Table of
Contents