User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 1997
2.3.13
In MMC 713, program the following:
MMC 713 LCR MODIFY DIGIT TABLE
INDEX NO. OF DELETE
DIGITS (15)
NO. OF INSERT
DIGITS (14)
NO. OF APPEND
DIGITS (14)
001 10XXX
NOTE: 10XXX is the access code for the long distance carrier of your choice.
 In MMC 603, move all of the C.O. lines from trunk group 9 to trunk group 80. You
will have to delete the line numbers from trunk group 9 as trunks can be in more
than one group.
 In MMC 724, assign 9 as the LCR access code. This will delete 9 from the first trunk
group automatically.
 In MMC 210, turn on LCR.
Setting LCR up like this will not prevent C.O. lines from being accessed by Direct Trunk
(DT) keys but it does mean that speed dial numbers will have to be reprogrammed to
allow them to access LCR.
HOME
PAGE
Table of
Contents