User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 1997
2.3.4
progress tones to speed up voice mail call processing. This program allows call
forwarding to a mailbox and bypassing of the main greeting for automatic message
retrieval. Blind transfers may be performed because the recall will be correctly
identified. NOTE: The effectiveness of this program depends on the ability of the
voice mail system to make use of this information.
f. STATION HUNT GROUP WITH OVERFLOW
Each station group can have an individual overflow destination with an individual
overflow timer. The overflow destination will ring whenever a call to the group is not
answered. If the voice mail system becomes inoperative, calls are automatically
routed to the overflow destination.
g. INTERNAL CALL FORWARDING TO VOICE MAIL
This option in MMC 300 will allow intercom calls to or deny them from following call
forward to voice mail. This feature conserves disk drive space by storing only calls
originating outside the PROSTAR system.
h. ONE TOUCH VOICE MAIL ACCESS
One touch speed dial keys can be programmed to automatically dial, log into and
retrieve messages from voice mail.
i. CALL PROGRESS TONES
The only tones sent to a VM/AA port are dial tone, busy and ringback. To eliminate
confusion, busy tone is substituted for DND or error tones on voice mail ports only.
HOME
PAGE
Table of
Contents