User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 804
ACTION DISPLAY
1. Press TRSF 804
Display shows
SYS I/O PORT:1
SERVICE:PC-MMC
2. Enter desired port via dial keypad (e.g., 2)
OR
SYS I/O PORT:2
SERVICE:SMDR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
3. Enter parameter desired via dial keypad
(e.g., 1) from the above option list
SYS I/O PORT:2
BAUD:9600 BPS
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: SERVICE PORT 1 PCMMC
PORT 2 SMDR
BAUD RATE 9600 BPS
CHAR LENGTH 8 BITS
PARITY NONE
RETRY COUNT 03
STOP BIT 1 BIT
WAIT TIME 200 MSEC
DSR CHECK ON
RELATED ITEMS: PCMMC
SMDR
HOME
PAGE
Table of
Contents