User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 804 SYSTEM I/O PARAMETER
DESCRIPTION:
Provides a means of setting parameters for the serial I/O ports to work with either a
personal computer or with SMDR recording. Programming can be accomplished
easily with the tables below to customize either I/O port.
PARAMETER OPTIONS
Dial 0 Service Type of Service
Dial 1 Baud Rate Speed
Dial 2 Char Length Character Length
Dial 3 Parity Parity Bit
Dial 4 Retry Count Number of Retries
Dial 5 Stop Bit Stop Bit
Dial 6 Wait Time Message Wait Time
Dial 7 DSR Check Wait for DSR
SERVICE TYPE PARITY
Dial 0 PCMMC Dial 0 None
Dial 1 SMDR Dial 1 Odd
Dial 2 Not used Dial 2 Even
SPEED STOP BIT
Dial 0 1200 bps Dial 1 1 bit
Dial 1 2400 bps Dial 2 2 bit
Dial 2 4800 bps
Dial 3 9600 bps
Dial 4 19200 bps
CHARACTER LENGTH
Dial 7 7 bits
Dial 8 8 bits
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear entry (when valid)
HOME
PAGE
Table of
Contents