User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 802 CUSTOMER ACCESS MMC NUMBER
DESCRIPTION:
Allows the customer to have access to certain MMCs. For example, it is advised that
the customer have access to MMC 102 Call Forward for call forwarding but it is not
advised that the customer have access to MMC 710 LCR DIgit Table for LCR dial
plans. This MMC is for both tenants.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRSF 802
Display shows
MMC TENANT:1
100:STN LOCK:YES
2. Enter desired tenant number (1–2) via dial
keypad
MMC TENANT:1
100:STN LOCK:YES
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
3. Enter desired MMC number via dial keypad
OR
MMC TENANT:1
102:CALL FWD:YES
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
4. Enter 1 for YES or 0 for NO via dial keypad
OR
MMC TENANT:1
102:CALL FWD:NO
Press UP or DOWN key to make selection
and press LEFT soft key to return to step 3
to make additional entries
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: NONE
RELATED ITEMS: NONE
HOME
PAGE
Table of
Contents