User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 JUNE 1995
MMC: 801 CHANGE TECHNICIAN PASSCODE
DESCRIPTION:
Used to change the passcode allowing access to MMC 800 Enable Techncian
Program from its current value.
NOTE: The passcode is four characters long. Each character can be digits 0–9 or .
The current or “old” passcode is required for this MMC.
PROGRAM KEYS
KEYPAD Used to enter passcodes
SPK Save data and advance to next MMC
ACTION DISPLAY
1. Press TRSF 801
TECH. PASSCODE
NEW CODE:_
2. Enter new passcode
TECH. PASSCODE
NEW CODE:****
3. Enter new passcode again
TECH. PASSCODE
VERIFY :****
4. If passcode is correct, press RIGHT soft key
to continue and enter desired MMC
TECH. PASSCODE
VERIFY SUCCESS
5. If passcode is incorrect
TECH. PASSCODE
VERIFY:FAILURE
6. System returns to step 2
TECH. PASSCODE
NEW CODE:****
7. Press TRSF to store and exit
OR
Press SPK to save and advance to next
MMC
DEFAULT DATA: DEFAULT PASSCODE = 1234
RELATED ITEMS: MMC 800 ENABLE TECHNICIAN PROGRAM
HOME
PAGE
Table of
Contents