User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 JANUARY 2002
MMC: 104
• iDCS KEYSETS
COUNT 1 2 3 4 5
DIAL 0 < > . ) 0
DIAL 1 space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P Q R S 7
DIAL 8 T U V

8
DIAL 9 W X Y Z 9
DIAL  : = [ ]

1. When the character you want appears on the same dial pad key as the previous
character, press UP to move the cursor one space to the right.
2. Other symbols are available for DIAL #.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
A Key 19; acts as toggle between upper case and lower case
ACTION DISPLAY
1. Press TRSF 104
Display shows
[201] STN NAME
2. Dial the station number (e.g., 205)
OR
[205] STN NAME
_
Press UP or DOWN to select station
and press RIGHT soft key to move cursor
3. Enter the station name using the procedure
described above
[205] STN NAME
SAM SMITH
Press the RIGHT soft key to return to step 2
HOME
PAGE
Table of
Contents