User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 726
ACTION DISPLAY
1. Press TRSF 726
Display shows
EXT FOR DN1
YES
2. Enter the OPTION number from above list
(e.g., 4)
SEPERATOR
NO
OR
Press UP or DOWN key to make selection
Press LEFT soft key to move cursor
3. Enter 1 for YES or 0 for NO
OR
SEPERATOR
YES
Press UP or DOWN key for selection and
press RIGHT soft key to return to step 2
4. If option 0 is selected at step 2
EXT FOR DN1
YES
5. If option 1 is selected at step 2
TRK FOR DN1
YES
6. If option 2 is selected at step 2
EXT FOR DN2
NO
7. If option 3 is selected at step 2
TRK FOR DN2
NO
8. If option 4 is selected at step 2
(A valid entry consists of digits 0–9 or alpha
SEPERATOR
NO
characters A–C)
9. If option 5 is selected at step 2
(A valid entry consists of digits 0–9 or alpha
DISCONECT SIGNAL
C
characters A–C)
10. If option 6 is selected at step 2
(A valid entry consists of digits 0–9 or alpha
CALL TYPE ID
DIRECT CALL : NO
characters A–C)
See above list under the CALL TYPE ID
options list
11. If option 7 is selected at step 2
(A valid entry consists of digits 0–9 or alpha
PROGRESS TONE ID
DIAL TONE :B
HOME
PAGE
Table of
Contents