User guide
PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 726 VM/AA OPTIONS
DESCRIPTION:
Provides a flexible means of setting in band signaling for voice mail or auto
attendant parameters. There are eight main options for programming and several
sub-options to customize the application. Main options are listed in bold type with
the sub-options listed in normal type. Simple YES/NO, numeric and alpha
characters are all the requirements needed for the setting of VM/AA.
The following options may be selected for VM/AA operation:
In band signaling OPTIONS LIST 0–7
0. EXT FOR DN1 DTMF information for the station that called the
VM/AA port station that is forwarded to VM/AA
port.
1. TRK FOR DN1 DTMF information for the trunk that called the
VM/AA port.
2. EXT FOR DN2 DTMF information for the station that originated
the call to a station that is forwarded to a VM/AA
port.
3. TRK FOR DN2 DTMF information for the trunk that called a
station forwarded to a VM/AA port.
4. SEPERATOR In cases where DN2 is used, this specific digit is
sent between the DN1 and the DN2 information.
Both DN1, DN2 must be set to YES for
SEPERATOR to be sent.
5. DISCONECT SIGNAL This signal is sent when the calling station or C.O.
line hangs up.
6. CALL TYPE ID Under this VM/AA option is several customizing
applications.
0. DIRECT CALL A call originating directly from another station in
the system.
1. ALL FWD CALL This indicates that a call was forwarded to the
VM/AA port from a station with CALL FORWARD
ALL set.
HOME
PAGE
Table of
Contents