User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 2000
MMC: 724 DIAL NUMBERING PLAN
DESCRIPTION:
Provides the access codes and dialing plan needed for the operation of features
and programs. The system comes with a wide range of acceptable numbering
plans set as default and the option to customize the dialing plan. There is also an
error message provided because of the chance of duplicating an access/feature
code. Dialing codes are entered via the dial pad key by pressing the dial pad
number the required steps to select the feature. For example, for OHVA, the number
6 would be pressed three times. NOTE: Please remember that this program is
system-wide.
DIAL KEYPAD
COUNT→ 1 2 3
DIAL 2 ACCT BGM CAMP
DIAL 3 DICT DICT FAUTO
DIAL 4 GPIK HLDPK IOG
DIAL 5 LCR LCR LCR
DIAL 6 MMPA NEW OHVA
DIAL 7 PAGE REJECT SG
DIAL 8 TG UA
DIAL 9 WCOS WCOS WCOS
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF
Display shows
DIAL NUMBER PLAN
ACCT :47 →
2. Using the chart, press dial pad key
number to make selection
DIAL NUMBER PLAN
DICT :NONE →_
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to advance cursor
3. Enter digits (e.g., 68) via the dial keypad DIAL NUMBER PLAN
DICT :NONE →68
HOME
PAGE
Table of
Contents