User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 JANUARY 2002
MMC: 723
ACTION DISPLAY
1. Press TRSF 723
Display shows
SYS.KEY PROGRAM
TYPE:24 BTN SETS
2. Enter the type of set via dial pad (e.g., 2)
OR
SYS.KEY PROGRAM
TYPE:24 BTN SETS
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
3. Enter key number (e.g., 18)
OR
SYS.KEY PROGRAM
18:DS →
Press UP or DOWN key to make selection and
press RIGHT soft key move cursor
4. Using the dial keypad chart, press the dial
pad key number to make a selection
SYS.KEY PROGRAM
18:DS →GPIK
OR
Press UP or DOWN key to make a selection
Press RIGHT soft key to advance cursor to
step 5 to enter extender if required
OR
Press LEFT soft key to return to step 3
5. If required, enter extender (e.g.,03)
OR
SYS.KEY PROGRAM
18:DS →GPIK03
Press UP or DOWN key to make a selection
Press RIGHT soft key to return to step 2
Press LEFT soft key to return to step 3
6. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: SEE BELOW
RELATED ITEMS: NONE
HOME
PAGE
Table of
Contents