User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 JANUARY 2002
MMC: 722
3. Enter selected key number (e.g., 18)
OR
[201] KEY (KTS)
18:NONE →_
Press UP or DOWN key to select key number
Press RIGHT soft key to move cursor
4. Using the dial keypad chart, press dial pad
key number to make a selection
[201] KEY (KTS)
18:NONE →GPIK_
OR
Press UP or DOWN key to make a selection
Press RIGHT soft key to advance cursor to
step 5 to enter extender if required or to return
to step 2
5. If required, enter extender (e.g.,03)
OR
[201] KEY (KTS)
18:NONE →GPIK03
Press UP or DOWN key to make a selection
Press RIGHT soft key to return to step 2
6. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: SEE BELOW
RELATED ITEMS: MMC 107 KEY EXTENDER
• DCS KEYSETS
Default 24 Button Keyset with or without Display
01:CALL1 02:CALL2 03:NONE 04:NONE 05:NONE 06:TG9
07:NONE 08:NONE 09:NONE 10:NONE 11:NONE 12:NONE
13:NONE 14:NONE 15:NONE 16:NONE 17:NONE 18:NONE
19:CONF 20:SPD 21:LNR 22:PAGE 23:CBK 24:MSG
Default 12 Button Keyset
01:CALL1 02:CALL2 03:NONE 04:NONE 05:NONE 06:TG9
07:CONF 08:SPD 09:LNR 10:PAGE 11:CBK 12:MSG
HOME
PAGE
Table of
Contents