User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 JANUARY 2002
MMC: 722 STATION KEY PROGRAMMING
DESCRIPTION:
Allows the customizing of programmable keys on specific electronic keysets, or
AOM on the DCS COMPACT system. For keysets, buttons 1 and 2 are set as CALL
buttons by default. For AOM’s all buttons are set as DS keys by default. Features
are entered via dial pad keys by pressing the dial pad number the required number
of steps to select the feature. For example, for OHVA, the number 6 is pressed three
times. If the BOSS key is required, press 2 for the first letter B and then use the UP
or DOWN key to change the selection from BARGE to BOSS.
DIAL KEYPAD
COUNT→ 1 2 3
DIAL 2 AAPLAY BARGE CALL
DIAL 3 DICT DICT FAUTO
DIAL 4 GPIK HLDPK IG
DIAL 5 LCR LCR LCR
DIAL 6 MMPA NEW OHVA
DIAL 7 PAGE REJECT SG
DIAL 8 TG UA
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 722
Display shows
[201] KEY (KTS)
01:CALL1 →
2. Enter selected station number (e.g., 205)
OR
[205] KEY (64B)
01:CALL1 →
Press UP or DOWN key to select station
Press RIGHT soft key to move cursor
HOME
PAGE
Table of
Contents