User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 1997
MMC: 718 SPECIAL CODE TABLE
DESCRIPTION:
Provides a way to insert the special feature codes to activate central office custom
calling features such as CID Block and call waiting disable. The special feature
codes can be used on a per call basis without affecting LCR or toll restriction
programming. There is a maximum of ten (10) entries available each of which may
be up to four digits long. The four rules that apply to the Special Code Table are as
follows:
Rule 1. Toll restriction is only applied to digits following the entries in the Special
Code Table. This eliminates toll restriction bypass with second dial tone
central office features such as CID block (✱67).
Rule 2. LCR will only route calls based on the digits following the entries in the
Special Code Table. This rule allows end user per call special code
activation.
Rule 3. LCR modify digits tables will only delete digits that are follow in the
Special Code Table entries. This allows central office features such as
CID block to be used when LCR deletes digits. Can be used in Foreign
Exchange (FX) routing by removing the 1+ area code..
Rule 4. LCR modify digits tables will only insert digits after the Special Code
Table entries. This allows for central office features such as call waiting
block to be activated but route the call with a specific PIC code such as
10288 (AT&T).
Example of Rule 4: User dials ✱67 1 305 529 2900, the DCS will seize a C.O. line and
dial ✱67 10288 1 305 529 2900.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
HOME
PAGE
Table of
Contents