User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 103 SET ANSWER MODE
DESCRIPTION:
Allows a system administrator to change the answer mode of any keyset or add-on
module. Each keyset or add-on module can have its answer mode set to one of the
following options:
0. RING: The keyset will ring in one of eight custom ring patterns. Calls are
answered by pressing the ANS/RLS key or by lifting the handset.
1. AUTO: After giving a short attention tone, the keyset will automatically answer
calls on the speakerphone. When a C.O. line is transferred to a keyset in Auto
Answer, the screened portion of the call will be Auto Answer, but the keyset or add-
on module (AOM) will ring when the transfer is complete if the user has not pressed
the ANS/RLS key or lifted the handset.
2.. VOICE: The keyset will not ring. After a short attention tone, callers can make an
announcement but the ANS/RLS key or handset must be used to answer calls.
NOTE: As the Basic 12B keyset is not a speakerphone, if it is set for Auto Answer, it
will operate as if it is in Voice Announce mode. The Basic 12B keyset user must use
the handset to speak to the calling party.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 103
Display shows
[201] ANS MODE
RING MODE
2. Dial keyset number (e.g., 205)
OR
[205] ANS MODE
RING MODE
Press UP or DOWN to select keyset
and press RIGHT soft key to move cursor
OR
Press ANS/RLS to select All
[ALL] ANS MODE
?
HOME
PAGE
Table of
Contents